Filter
Top Products
20 Symmetra® MW with Internal Bypass Static Switch - User Guide - 990-1756A-001
User Configuration Screens
There are five User Configuration screens:
• Touch-Screen Settings screen
• Password Settings screen
• Modbus Settings screen
• Regional Settings screen
• Battery Test screen
Touch-Screen Settings screen
The Touch-Screen Settings screen is used to customize the brightness, contrast and backlight of the
display.
• Brightness: Put the finger on the indicator and slide to the left or right to the desired setting.
• Contrast: Put the finger on the indicator and slide to the left or right to the desired setting.
• Backlight mode: The backlight mode’s default setting is that the light goes off after 5 minutes of
inactivity.
• Backlight timeout (minutes): The display backlight can be set to be always on or to turn off after
a certain period of screen inactivity.
Normal
0
100%
Brightness
100 %
0
100%
Contrast
35%
Normal
User Configuration
2:27 PM
Always on
5
Touch-Screen Settings
Page 1 of 5
Backlight mode
Backlight timeout (minutes)