Filter
Top Products
PDU Display Interface: Config Screen
150kW InfraStruXure PDU—Operation and Configuration 29
Electrical Config
This option of the Config screen displays information about the electrical service that provides input
to the InfraStruXure PDU. All of the values displayed on this screen are set at the factory. Use this
information when viewing and setting alarms.
Manufacturer Data
Use this option of the Config screen to display a scrollable list containing information about the
InfraStruXure PDU. This information is useful when requesting service or product updates. The
following information is displayed:
• Manufacturer Name
• Date of Manufacture
• Date of Calibration
• Hardware Revision
• Firmware Revision (for PDU Monitoring and Metering)
• Serial Number
• Model Number
Input Config Configure the following items:
• Main Input: The voltage from the power source coming into
the PDU main input switch.
• 3W: 3-phase Delta, measured line-to-line
• 4W: 3-phase WYE, measured line-to-neutral
• Transformer: Indicates whether the InfraStruXure PDU has
a transformer.
Output Config Configure the following items:
• Panel Voltage: The nominal voltage of the distribution panels
supplying power to the load equipment. (This is measured
line-to-neutral.)
• Panel Breaker: The rating, in amps, of the circuit breaker
feeding the distribution panels.