Filter
Top Products
Overview: InfraStruXure PDU
150kW InfraStruXure PDU—Operation and Configuration 11
The Display port (RJ-45) connects the PDU monitoring unit to the display interface.
The Power LED indicates whether the monitoring unit is receiving power.
Use the Console port (DB-9) to connect a laptop computer to the monitoring unit using an
appropriate communication cable. This port is used to configure items relating to servicing
the PDU.
Note
The branch current monitoring boards connect to the Branch Current Monitor ports
(RJ-11). These ports are on the side of the PDU monitoring unit, and are labeled on the
face of the unit. Each port corresponds to a section of circuit breakers on the PDU
distribution circuit breaker panel: upper left = [01..41]; upper right = [02..42]; lower
left = [43..83]; lower right = [44..84].