American Power Conversion PD60G6FK1 Power Supply User Manual


 
PDU Display Interface
60 kW InfraStruXure PDU — Operation and Configuration 29
Electrical Config
This option of the Config screen displays information about the electrical service that provides input
to the PDU. All of the values displayed on this screen are set at the factory. Use this information
when viewing and setting alarms.
Manufacturer Data
Use this option of the Config screen to display a scrollable list containing information about the
PDU. This information is useful when requesting service or product updates. The following
information is displayed:
Manufacturer Name
Date of Manufacture
Date of Calibration
Hardware Revision
Firmware Revision (for PDU monitoring and metering)
Serial Number
Model Number
System ID
Use this option of the Config screen to identify your PDU. The following fields can be configured:
Input Config Configure the following items:
Main Input: The voltage from the power source coming into
the PDU main input switch.
3W: 3-phase Delta, measured line-to-line
4W: 3-phase wye, measured line-to-neutral
Transformer: Indicates whether the PDU has a transformer.
Output Config Configure the following items:
Panel Voltage: The nominal voltage of the distribution panels
supplying power to the load equipment. (This is measured
line-to-neutral.)
Panel Breaker: The rating, in amps, of the circuit breaker
feeding the distribution panels.
Device Name Set a unique name for your PDU.
Product Location Name the physical location of the product in your data center.
Product Contact Identify the person to notify concerning questions or problems with regard
to the product.