Filter
Top Products
User's Guide 30
FEATURE NAME VALUE RANGE DESCRIPTION
Media Type [ Direct Thermal, Thermal
Transfer ]
Set to Thermal Transfer if ribbon
is used.
Media Sensing [Gap, Continuous, Black Bar ] Set to match media sensing
method.
Calibrate Media (Form Length / Gap Length)
automatically displayed and are
not adjustable from this feature.
Click the Enter button to initiate
the media calibration. The
detected media length and Gap
are displayed. Not required
when Media Sensing is set to
Continuous
Sensor Threshold [ 0-255] Automatically set by Calibration
mode.
Media Length [ 0.25 - 12.00] (Inches)
Automatically set by Calibration
mode
Media Width
[ 0.5 - 4.05] (Inches, 4602)
[ 0.5 - 4.25] (Inches, 4603)
Set to media width used.
Present Distance [ 0.00 - 1.00 ] (Inches) Adjust to position label at tear
bar. If optional Peel and
Present kit is installed, this
feature will specify how far the
label is presented. After setting
this feature the printer will feed
to the top of the next label.
Present Sensor [Enable, Disable] This feature controls the
operation of the optional present
sensor. When installed and
enabled, the printer suspends
printing after each label until it is
removed by the operator. This
is typically used when the peel
and present option is installed
but could also be used with the
tear bar.