Filter
Top Products
User's Guide 31
Setup Feature and Value List (continued)
Vert Print Align [ -0.50 - +0.50 ] (Inches) Adjust to move printed image up
or down on label. Positive
values move image up.
Negative values move image
down. After setting this feature
the printer will feed to the top of
the next label.
Horz Print Align [ 0.00 - 1.00 ] (Inches) Adjust to move printed image
left or right. Larger values move
the image to the right.
Vert Size Adjust [ -60 - + 60 ] Vertically expands or
compresses print image.
Negative values are
compressed, positive values are
expanded.
Print Darkness [ -12 - +12 ]
Adjust for optimal print
darkness. Positive values are
darker.
Print Speed [ 2, 3] (IPS) Adjusts print speed.
Interface Select [ Parallel Only, Serial Only, Auto
Select ]
Selects active interface while
ignoring non-selected interface.
Setting to Auto Select enables
both interfaces and performs
automatic port arbitration.
COM1: Baud Rate [ 1200, 2400, 4800, 9600, 14400,
19200, 38400, 57600 ]
Set to match host.
COM1: Parity [ None, Odd, Even ] Set to match host.
COM1: Data Bits [ 7, 8 ] Set to match host.
COM1: Handshake [ RTS, XON/XOFF, RTS & XON,
None ]
Set to match host.
COM1: PAL Xmit [ Enabled, Disabled ]
Enables or disables trans-
mission of PAL
TM
messages
over serial interface.