AMT Datasouth 400 Printer User Manual


 
User's Guide 15
INSTALLATION AND CONFIGURATION
Finding a Location for the Printer
Determine a suitable location for the printer and power supply brick with the following
requirements:
Find a flat stable surface with sufficient clearance to allow for interface cables and media
loading.
The location should be near the host or terminal. Consider the distance between the host
and printer for the communication cable (serial or parallel cable).
The location should be free from excessive direct sunlight, temperature, humidity, dust,
dirt, and debris.
The location should be near a grounded AC power receptacle wired in compliance with
local ordinances.
Figure 5 – Switches, Indicators and Connections
Power LED
Ready LED
Feed button
Serial Port
Power Jack
Parallel Port
On Switch