APC 10-30 KVA 208/220 V Power Supply User Manual


 
Connect Communication Cables between UPS and XR
Battery Enclosure
1
1
3 2
2
XR Battery Enclosure UPS
1. Feed the cable from pin connection J106 in the UPS down through the conduit (if applicable).
2. Run the cable up into the XR conduit and connect it to pin connection J200 in the XR Battery
Enclosure.
3. If you use a second XR, run the cable from pin connection J204 in XR1 to pin connection J200 in
XR2.
34
MGE™ Galaxy™ 3500 10-30 kVA 208/220 V Single and Parallel Installation
990-1957C-001