Apollo 120 Personal Computer User Manual


 
User Manual version 2207
APOLLO 120/150 III
9-154
9.2. Elo Touchscreen Driver Installation
The Elo resistive touch and Intelli touch will use the same
drivers and utilities which are stored in either the CD diskette
or floppy disk drive.
9.2.1. System Requirements
The DOS drivers will run on any system with DOS 2.0 or later
version. The Windows drivers will run on any system with
Windows 3.1 or later versions. The DOS demonstration
program requires a VGA color display. The touchscreen
calibration program for DOS supports standard and
VESA-compatible display modes. Otherwise, all software is
video independent. An Elo touchscreen must be installed on
the display and connected to a serial or bus controller.