Filter
Top Products
User Manual version 2007
APOLLO 120/150 III
9-161
9.2.4. Installing MonitorMouse for Win 95
1. Turn on your computer.
2. Insert the MonitorMouse for Windows 95 disk into drive
A.
3. Click the Start button, and then click Run.
4. Type "a:\setup" in the space provided and press
<Enter>.
5. Follow the instructions on the screen.
6. The Touchscreen Setup Wizard will appear. You will need
to specify the type of touchscreen controller you are
using and how it is connected.
Control type: serial
SmartSet: 2xx0
COM port: COM1
7. Complete the Setup program.
8. Restart Windows 95.
9. Run the Windows 95 Registry Editor by clicking the Start
button. Click Run, then type “regedit” and press
<Enter>
10. Edit the value of the following registry keys in the
following registry key folder to match the number, I/O
port Address, and IRQ of the COM port to which the
touchscreen is connected:
HKEY_LOCAL_MACHINE\System\CurrentControlSet\Service
s\VxD\MonMouse\
TouchScreen00
\ComPort (the COM port number)
COM 3: 03 00
\ControllerAddress E8 03
\ControllerIRQ (hexadecimal)
IRQ 10: 0A 00