Filter
Top Products
User Manual version 2207
APOLLO 120/150 III
5-
68
FDD cable
5.9.2. External FDD Connection
1. Use the provided 15-34 pin FDD cable
(see below figure) to connect to the
system's 15-pin FDD D-sub connector
located at the rear side of the cover.
2. Connect the other end (34 pin) of the FDD cable to a
standard 3.5” FDD. Match pin 1 of the FDD and pin 1 of
the cable.
3. To drive the floppy disk drive, it will need 5V power.
Connect the provided FDD power cable to the floppy disk
drive to the +5V/12V DC-out connector to obtain 5V
power for the device.