Filter
Top Products
Upgrades Power Macintosh 7600 Upgrade - 6
3 Install the EMI clip that came with the Upgrade Kit onto
the Power Macintosh 7600 logic board in the same
location as the one you removed from the old logic board
at the very beginning of the upgrade procedure.
IMPORTANT
: Once you have installed the EMI clip, do not
set down the logic board or you may damage the board. Be
sure to install the logic board into the bottom housing
immediately.
4 Install the logic board in the computer.
5 Install on the Power Macintosh 7600 logic board any
cache, DRAM, or VRAM DIMM(s) that you removed
earlier from the Power Macintosh 7200 logic board.