Filter
Top Products
Take Apart Floppy Drive - 14
4 Pull out on the plastic
drive rails that hold the
floppy drive to the drive
chassis and push the
drive back to release it.
Replacement Note:
If you
are replacing the floppy
drive, remove the EMI
gasket from the defective
drive and attach the gasket
in the center of the replace-
ment drive’s top surface,
with the “V” of the gasket
pointing at the front edge of
the drive. If the old gasket
won't stick, order a new
gasket (p/n 922-1895).
Drive Rails Floppy Drive