Filter
Top Products
Upgrades Power Macintosh 7600 Upgrade - 13
13 Replace the following components. Refer to the Take
Apart chapter for instructions:
• Power Actuator
• Speaker
• PCI Cards (if present)
• Top Housing
IMPORTANT
: Do not replace the processor fan (if
present in the original Power Macintosh 7200 unit).
The fan is not used with the Power Macintosh 7600 logic
board and will interfere with air flow and the
installation of the processor card.
14 Affix the Power Macintosh 7600 product ID label over
the original Power Macintosh 7200 label.