Filter
Top Products
Then follow these steps:
1 Assemble the VCR, television, microphone, and cables you need.
Be sure to use a microphone designed for your model of the Macintosh, such
as the Apple PlainTalk Microphone.
You need the following cables (available at an electronics supply store):
m Video cable with S-video connectors or RCA plugs at each end.
m Audio cable with dual RCA plugs at one end and a stereo miniplug at the
other end, or dual RCA plugs at each end.
m A cable to connect your TV to your VCR.
You can also use an all-in-one cable (with one video and two audio RCA
plugs at each end) if you attach appropriate adapters.
IMPORTANT
A Y-shaped adapter is supplied with the round microphone for
some models of the Macintosh. This adapter is not compatible with your
Macintosh.
2Attach one end of the video cable to the Video In socket on the VCR (follow the
directions that came with the VCR).
3Plug the other end of the video cable (or adapter) into the S-video output port on the
Macintosh.
If the connector doesn’t slide easily into the port, realign it and try again.
Forcing a connector into the port could damage the computer or cable.
Stereo miniplug
RCA
S-video
S-video
RCA RCA
S-video
Adapter for composite video
106
Chapter 8