Filter
Top Products
To restart your Macintosh, try the following steps:
1If you can, choose Restart from the Special menu or from the dialog box that’s on
screen.
2If you can’t choose Restart, hold down the
x
and Control keys while you press the
Power On key.
This key combination restarts the computer. (Use this key combination only
when choosing Restart from the Special menu does not work.)
3If nothing happens, look for the reset and interrupt switches on the front of your
Macintosh and press the reset switch (the one marked with a triangle).
Pressing the reset switch is like turning the power switch off and then on
again. You will lose any work you haven’t saved. (The interrupt switch is
intended for use by programmers who have debugging software installed.)
4If pressing the reset switch does nothing, turn off your computer using the power switch,
wait at least 10 seconds, then turn it on again.
5If the power switch doesn’t turn off the computer, unplug your Macintosh.
If you suspect that the problem is with a peripheral device, such as a printer
or external hard disk, turn it off for 10 seconds or more, then turn it on again
and restart the Macintosh.
117
Solutions to Common Problems