Filter
Top Products
4Plug the RCA connectors on the audio cable into the left and right Audio In sockets on
the VCR.
5Plug the stereo miniplug on the audio cable (or adapter) into the sound output port on
the Macintosh.
For more information about the sound output port and the stereo miniplug,
see Chapter 7.
6Connect the VCR’s Video Out port to the television’s Video In port.
Use an RCA or S-video cable to connect the VCR to the television. Do not
use coaxial cable.
To ensure that your presentation is recorded on videotape and shown on the
television, you must connect the VCR to the computer and the television to
the VCR.
7Connect the microphone to the sound input port (
X
) on the Macintosh.
The illustration below shows the equipment configuration and the
connections needed to record the computer’s video output and to add voice
annotation to the video.
8 Turn on the computer, the VCR, and the television.
S-video
output port
Sound
output
port
Video
In port
Audio In ports
(left and right)
3.5 mm miniplug to dual RCA-plug cable
(available at most electronics supply stores)
TV
Video
Out port
Video In port
Sound
input
port
Microphone
VCR
107
Using Video With Your Power Macintosh 8100/80
AV