Filter
Top Products
Connecting an audio device
To play or record sound with your Macintosh, you can attach a microphone,
amplifier, tape recorder, or a pair of speakers.
If your Macintosh has AV capabilities, you can record sound and video
simultaneously by connecting a VCR to the S-video output port and linking
the computer’s sound output port to the sound input channels on the VCR.
(See “Connecting a VCR to View Video Images or Capture Frames” in
Chapter 8.)
Follow these steps to connect an audio device to the Macintosh.
1Make sure that the audio device has a cable with a stereo miniplug connector.
If not, attach an adapter that has a stereo miniplug.
2Place the audio device near the Macintosh.
3Shut down the Macintosh and turn off the audio device.
4Attach the cable to the audio device and to the sound port on the Macintosh.
5 Turn on the computer and the audio device and begin working with sound.
About microphones: Be sure to use a microphone designed for your model of
the Macintosh, such as the Apple PlainTalk Microphone. You can obtain
information about other microphones from an Apple-authorized dealer.
The Apple PlainTalk Microphone and the software needed for using spoken
commands are available from Apple-authorized dealers.
89
Using Stereo Audio