Filter
Top Products
When You Have Problems Operating the Machine
13
1
Note
❒ Loading curled paper in the cut paper tray can result in misfeeds and soiled
paper edges. To load curled paper in the cut paper tray, first flatten it by hand,
and be sure to load it print side down. Also, to prevent paper from curling,
lay paper on a flat surface, and do not lean it against the wall.
❒ If you cannot make copies as you want because of paper type, paper size, or
paper capacity problems, use recommended paper. See “Copy Paper”, About
This Machine.
Reference
“Copy Paper”, About This Machine
Memory frequently be-
comes full.
The document server
memory is full.
Delete unnecessary files. On the file se-
lection display, select unnecessary files,
and then press [Delete File]. If this does
not increase available memory, do the
following.
• Switch to the scanner screen, and
then delete unnecessary files stored
under the scanner function.
• Switch to the printer screen, and
then delete unnecessary files stored
under Sample Print, Locked Print,
Hold Print, or Stored Print.
You want to check print
quality before making a
large print run.
You can print a single
copy without specifying
the setting again.
Check print quality by printing out only
the first set using the {Sample Copy} key.
Problem Cause Solution