Areca ARC-1110 Computer Hardware User Manual


 
WEB BROWSER-BASED CONFIGURATION
130
The “RESCUE” function can recover the missing RAID set infor-
mation. The RAID controller uses the time as the RAID set signa-
ture. The RAID set may have different time after the RAID set is
recovered. The “SIGANT” function can regenerate the signature
for the RAID set.
6.6 Volume Set Functions
A volume set is seen by the host system as a single logical device.
It is organized in a RAID level with one or more physical disks.
RAID level refers to the level of data performance and protection of
a volume set. A volume set capacity can consume all or a portion
of the disk capacity available in a RAID set. Multiple volume sets
can exist on a group of disks in a RAID set. Additional volume sets
created in a specied RAID set will reside on all the physical disks
in the raid set. Thus each volume set on the RAID set will have its
data spread evenly across all the disks in the RAID set.
6.6.1 Create Volume Set
1. Volume sets of different RAID levels may coexist on the same
raid set.
2. Up to 16 volume sets can be created by the SATA RAID control-
ler.
3. The maximum addressable size of a single volume set is not
limited to 2 TB because the controller is capable of 64-bit mode.
However, the operating system itself may not be capable of ad-
dressing more than 2 TB. See the Areaca website for details.
To create a volume set on a raid set, move the cursor bar to the