Areca ARC-1110 Computer Hardware User Manual


 
WEB BROWSER-BASED CONFIGURATION
138
6.8 System Controls
6.8.1 System Cong
To set the raid system function, move the cursor to the main
menu and click the “Raid System Function” link. The “Raid System
Function” menu will show all items, then select the desired func-
tion.
System Beeper Setting
The Alert Beeper function item is used to Disabled or Enable the
SATA RAID controller alarm tone generator.
Background Task Priority
The Raid Rebuild Priority is a relative indication of how much
time the controller devotes to a rebuild operation. The SATA
RAID controller allows the user to choose the rebuild priority
(ultraLow, Low, Normal, High) to balance volume set access
and rebuild tasks appropriately. For high array performance,
specify a Low value.
JBOD/RAID Conguration
JBOD is an acronym for “Just a Bunch Of Disks”. It repre-
sents a volume set that is created by the concatenation of par-
titions on the disk. The OS can see all disks when this option is
selected. It is necessary to delete a RAID set if the disks in that
set are to be convereted to JBOD mode.
Maximun SATA Supported
The SATA RAID controller can support up to SATA ll, which runs
up to 300MB/s. NCQ is a command protocol in Serial ATA that
can only be implemented on native Serial ATA hard drives. It
allows multiple commands to be outstanding within a drive at
the same time. Drives that support NCQ have an internal queue
where outstanding commands can be dynamically rescheduled
or re-ordered, along with the necessary tracking mechanisms
for outstanding and completed portions of the workload. The
RAID subsystem allows user to choose the SATA Mode (slowest
to fastest): SATA150, SATA150+NCQ, SATA300, SATA300+NCQ.
• HDD Read Ahead Cache