Filter
Top Products
137
WEB BROWSER-BASED CONFIGURATION
When the “Enter Pass-Through Disk Attribute” screen appears,
modify the drive attribute values, as you want.
After you complete the selection, mark the checkbox for “Conrm
The Operation” and click on the “Submit” button to complete the
selection action.
6.7.3 Delete Pass-Through Disk
To delete a pass-through drive from the pass-through drive pool,
move the mouse cursor bar to the main menus and click the “De-
lete Pass Through” link.
After you complete the selection, mark the checkbox for “Conrm
The Operation” and click the “Submit” button to complete the
delete action.
6.7.4 Identify Selected Drive
To prevent removal of the wrong drive, the selected disk LED will
light so as to physically locate the intended disk when “Identify
Selected Drive” is selected.
To identify the selected drive from the drives pool, click “Identify
Selected Drive”. The “Select The IDE Device For Identication”
screen appears mark the checkbox for the IDE device from the
drive pool and select the Flash method. After completing the se-
lection, click on the “Submit” button to identify selected drive.