Areca ARC-1110 Computer Hardware User Manual


 
WEB BROWSER-BASED CONFIGURATION
136
6.7.1 Create Pass-Through Disk
To create pass-through disk, move the mouse cursor to the main
menu and click on the “Create Pass-Through” link. The “rela-
tive setting function” screen appears. A pass-through disk is not
controlled by the SATA RAID controller rmware, it cannot be a
part of a volume set. The disk is available to the operating system
as an individual disk. It is typically used on a system where the
operating system is on a disk not controlled by the RAID rm-
ware. The user can also select the cache mode, Tagged Command
Queuing, SCSI channel/SCSI_ID/SCSI_LUN for this volume.
6.7.2 Modify Pass-Through Disk
Use this option to modify the “Pass-Through Disk Attribute”. The
user can modify the cache mode, Tagged Command Queuing,
and SCSI channel/ID/LUN on an existing pass through disk.
To modify the pass-through drive attribute from the pass-through
drive pool, move the mouse cursor bar and click on the “Modify
Pass-Through” link. The “Select The Pass Through Disk For Modi-
cation” screen appears mark the checkbox for the Pass-Through
Disk from the pass-through drive pool and click on the “Submit”
button to select drive.