Filter
Top Products
BIOS CONFIGURATION
91
3.7.5.5 Background Task Priority
The “Background Task Priority” is a relative indication of how
much time the controller devotes to a rebuild operation. The
SATA RAID controller allows the user to choose the rebuild prior-
ity (ultralow, low, normal, high) to balance volume set access
and rebuild tasks appropriately.
3.7.5.6 Maximum SATA Mode
The SATA RAID controller can support up to SATA ll, which runs
up to 300MB/s, twice as fast as SATA150. NCQ is a command
protocol in Serial ATA that can only be implemented on na-
tive Serial ATA hard drives. It allows multiple commands to be
outstanding within a drive at the same time. Drives that support
NCQ have an internal queue where outstanding commands can
Controller I/O Port:F3000000h, F2: Select Controller, F10: Reboot System
ArrowKey Or AZ:Move Cursor, Enter: Select, ESC: Escape, L:Line Draw, X: Redraw
Areca Technology Corporation RAID Controller
Main Menu
Quick Volume/Raid Setup
Raid Set Function
Volume Set Function
Physical Drives
Raid System Function
Ethernet Conguration
View System Events
Clear Event Buffer
Hardware Monitor
System information
Raid System Function
Raid System Function
Mute The Alert Beeper
Alert Beeper Setting
Change Password
JBOD/RAID Function
Background Task Priority
Maximum SATA Mode
HDD Read Ahead Cache
Stagger Power on
Empty HDD slot LED
HDD SMART Status Polling
Controller Fan Detection
Disk Write Cache Mode
Capacity Truncation
Background Task Priority
Raid Rebuild Priority
UltraLow(5%)
Medium(50%)
High(80%)
Low(20%)
Controller I/O Port:F3000000h, F2: Select Controller, F10: Reboot System
ArrowKey Or AZ:Move Cursor, Enter: Select, ESC: Escape, L:Line Draw, X: Redraw
Areca Technology Corporation RAID Controller
Main Menu
Quick Volume/Raid Setup
Raid Set Function
Volume Set Function
Physical Drives
Raid System Function
Ethernet Conguration
View System Events
Clear Event Buffer
Hardware Monitor
System information
Raid System Function
Raid System Function
Mute The Alert Beeper
Alert Beeper Setting
Change Password
JBOD/RAID Function
Background Task Priority
Maximum SATA Mode
HDD Read Ahead Cache
Stagger Power on
Empty HDD slot LED
HDD SMART Status Polling
Controller Fan Detection
Disk Write Cache Mode
Capacity Truncation
Maximum SATA Mode
Maximum SATA Mode
SATA150
SATA150+NCQ
SATA300
SATA300+NCQ
SATA150+NCQ