Filter
Top Products
IPS 1000 Series VoIP Gateway
19
7. 02192*168*0*2# ; IP address.
8. 03255*255*255*0# ; Subnet Mask .
9. 981
# ; Used to restart the IPS unit.
10. Hang up the phone to complete the configuration.
Step 2：Configure IP address of PC
Use the provided Ethernet cable to connect your PC to the port labeled “PC”, located on the rear panel
of the IPS unit.
Because the IPS-1000 series unit’s default IP setting is 192.168.0.2, you must configure your PC to the
same subnet. “192.168.0.x” for example. The following example uses 192.168.0.5 for the IP address
and 255.255.255.0 for the subnet mask.