Filter
Top Products
IPS 1000 Series VoIP Gateway
20
After you have completed the PC’s IP address setting, you will be required to restart the PC in order for
the new settings to take effect.
Step 3: Using the browser to configure the PPPoE Parameters of the gateway.
On the PC that is connected to the IPS unit, enter the IPS unit’s IP address (Default 192.168.0.2) and
press enter. The IPS will then prompt you with a dialogue box requesting that you enter a password. Use
“WEB” (all capitals), for the User field and “123” for the password field that you have previously
configured. Click the OK button; you should now have access to the IPS unit’s web based management
interface page.
The
MOSA
unit’s IP
“WEB”
should be all