Filter
Top Products
IPS 1000 Series VoIP Gateway
53
14. Appendix
14.1. Appendix A: Phone-Set Command
Pick up the handset and listen for the dialing tone. Dial “##0000 and listen for three consecutive tones
before setting the following parameters. After input the parameters, please dial ‘# to end the
configuration.
Command Description
Parameters
01 IP State 0 : static; 1: DHCP; 2: PPPoE
02 IP Address xxx*xxx*xxx*xxx
03 Subnet Mask xxx*xxx*xxx*xxx
04 Default Gateway xxx*xxx*xxx*xxx
05 Primary DNS Server
IP
xxx*xxx*xxx*xxx
06 Second DNS Server
IP
xxx*xxx*xxx*xxx
07 Select Signaling Port 0~65535
08 Select RTP Base Port 0~65534 (limit to even port number only)
09 PPPoE username User name (use the mapping table to map
character into digits)
10 PPPoE password Password (use the mapping table to map
character into digits)
11 DND 0 : Disable ; 1: Enable
12 SIP Forward State 0 : Disable ; 1: Enable; 2: Busy; 3: No Answer
13 SIP Forward Target 6 Digits
14 Change Service Port 1:FTP; 2:HTTP 3:Telnet (Port: 0-65535)
15 Change WEB
Password
6 digits
16 Change FTP
Password
6 digits
40 Listen for the IP
Address
(ending ”#” is not required)
41 Listen for the Subnet (ending ”#” is not required)