Filter
Top Products
Performing Basic Management Functions
Page 4-5
Configuring Network Access Parameters
To configure and/or manage an AsantéHub 1016-IQ, the AsantéHub
1016-IQ needs to be properly configured with network access parame-
ters.
These parameters are initially configured in the AsantéHub 1016-IQ via
the its console port; however, some can be modified using IntraSpec-
tion.
To configure network access parameters:
1 Click Network.
The Network Information Table appears, similar to Figure 4-4.
Figure 4-4 Network Information Table
2 Click once in the field to be edited.
For a description of each field, see “Network “ on page 5-9.
▲ Important: If you change the IP address, sub-
net mask, and/or default gateway, you must
reset the AsantéHub 1016-IQ. See “Resetting the
AsantéHub 1016-IQ” on page 4-13.
3 Type the new information.
4 Click Apply.
The network access information is edited. Click Refresh
to view updated information.