Filter
Top Products
Identify
Page 5-3
Configuration
This menu is not a management option; it is a title for the sub-menus
listed below it. This menu cannot be selected.
Identify
This menu provides read-only and configurable identification informa-
tion for the device.
Table 5-2 describes each field in the Identify menu.
∆ Note: For instructions on using this menu, see “Config-
uring Device Identification Information” on page 4-6.
Table 5-2 Identify Menu
Field Description
Physical Address Read-only field; displays the device’s hardware address.
Object ID Read-only field; displays the device’s SNMP identifying
number.
Description Read-only field; displays a description of the device.
Name Configurable field; assigns a name to the device.
Note:
A maximum of 254 characters (including spaces) is
allowed.
Location Configurable field; assigns a location to the device (where
the device is physically located).
Note:
A maximum of 254 characters (including spaces) is
allowed.
Contact Configurable field; assigns a name of the person respon-
sible for the device.
Note:
A maximum of 254 characters (including spaces) is
allowed.
Up Time Read-only field; displays the amount of time the device
has been operational since the last time it was off-line.
Interfaces Read-only field; displays the number of network inter-
faces present on this device.