Filter
Top Products
2-10 Chapter 2: Installation
2.4.3 System Event Log
Allows you to view all the events in the BMC event log. It will take a maximum of 15
seconds to read all the BMC SEL records.
SEL Components [Disabled]
Allows you to enable or disable all features of system event log during
booting.
The following items become congurable when you set SEL Components to
[Enabled].
Erase SEL [No]
Allows you to select how to erase SEL.
Conguration options: [No] [Yes, On next reset] [Yes, On every reset]
When SEL is Full [Do Nothing]
Allows you to select what to do to a full SEL.
Conguration options: [Do Nothing] [Erase Immediately]
: Select Screen
: Select Item
Enter: Select
+/—: Change Opt.
F1: General Help
F9: Optimized Defaults
F10: Save ESC: Exit
Version 2.01.1204. Copyright (C) 2010 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2010 American Megatrends, Inc.
Server Mgmt
Enabling/Disabling Options
SEL Components [Disabled]
Erasing Settings
Erase SEL [No]
When SEL is Full [Do Nothing]
NOTE: All values changed here do not take effect
until computer is restarted.
Select to configure LAN channel
parameters statically or
dynamically(DHCP). Do nothing
option will not modify any BMC
network parameters during BIOS
phase.