Asus P2B-N Computer Hardware User Manual


 
ASUS P2B-N User’s Manual 15
3. HARDWARE SETUP
Riser Card Contents
3. H/W SETUP
Riser Card Expansion Slots
1) ISA (NLX-R) p. 30 16-bit ISA Bus Expansion Slots*
ISA (B9-N) 16-bit ISA Bus Expansion Slots
SLOT1/1A (Yeong-Yang) 16-bit ISA Bus Expansion Slots
2) PCI1, PCI2 (NLX-R) p. 30 32-bit PCI Bus Expansion Slots
PCI1, PCI2, PCI3 (B9-N) 32-bit PCI Bus Expansion Slots
PCI1, PCI2 (Yeong-Yang) 32-bit PCI Bus Expansion Slots
Riser Card Connectors
1) CDIN (Yeong-Yang) p. 36 Stereo Audio In Connector
2) LAN_LED (NLX-R) p. 37 LAN Activity LED Connector (2 pins)
WOL_CON (NLX-R) Wake-On-LAN Connector (3 pins)
WAKEUP (B9-N) Wake-On-LAN Connector (3 pins)
WOL_CON (Yeong-Yang) Wake-On-LAN Connector (3 pins)
3) FCON (NLX-R) p. 37 Front Panel Connector (16-1 pins)
HEAD_SPK (NLX-R) Speaker Connector (4-1 pins)
LED_CTRL (B9-N) Front Panel Connector (16-1 pins)
HEAD_SPK (B9-N) Speaker Connector (4-1 pins)
PANEL (Yeong-Yang) Front Panel Connector (16-1 pins)
4) MIC-CON (NLR-R) p. 38 Front Panel Microphone Jack Connector (2 pins)
JP-2K (B9-N) Front Panel Microphone Jack Connector (2 pins)
MIC (Yeong-Yang) Front Panel Microphone Jack Connector (2 pins)
5) POWER p. 38 NLX Power Supply Connector (20-pin block)
ATXPWR NLX Power Supply Connector (20-pin block)
Power NLX Power Supply Connector (20-pin block)
6) IDE1 (NLX-R) p. 39 IDE Connector (40-1 pins)
IDEA, IDEB (B9-N) IDE Connectors (40-1 pins)
IDE1, IDE2 (Yeong-Yang) IDE Connectors (40-1 pins)
7) FLOPPY (NLX-R) p. 39 Floppy Drive Connector (34-1 pins)
FLOPPY (B9-N) Floppy Drive Connector (34-1 pins)
FLOPPY (Yeong-Yang) Floppy Drive Connector (34-1 pins)
8) USB (NLX-R) p. 40 USB Ports (Two 4-pin sockets)
USB1 (B9-N) USB Ports (Two 4-pin sockets)
USB (Yeong-Yang) USB Module Connector (5-1 pins)
9) IR, CIR (NLX-R) p. 40 IrDA-Compliant Infrared Module (Lenses)
IR (B9-N) Infrared Module Connector (10-1 pins)
IR (Yeong-Yang) Infrared Module Connector (5-1 pins)
* The optional onboard hardware monitor uses the address 290H-297H, so legacy
ISA cards must not use this address or else conflicts will occur.