Filter
Top Products
ASUS P2B-N User’s Manual 21
WARNING! Frequencies above 100MHz exceed the specifications for the
onboard Intel Chipset and are not guaranteed to be stable.
3. HARDWARE SETUP
Motherboard Settings
3. H/W SETUP
Set the jumpers by the Internal speed of your processor as follows:
(CPU Bus Freq.) (Freq. Multiple)
Intel CPU Model Freq. Mult. Bus Freq. FS0 FS1 FS2 BF0 BF1 BF2 BF3
Pentium III 600MHz 6.0x 100MHz [1-2] [1-2] [1-2] [2-3] [2-3] [2-3] [1-2]
Pentium III 550MHz 5.5x 100MHz [1-2] [1-2] [1-2] [1-2] [1-2] [1-2] [2-3]
Pentium III 500MHz 5.0x 100MHz [1-2] [1-2] [1-2] [2-3] [1-2] [1-2] [2-3]
Pentium III/II 450MHz 4.5x 100MHz [1-2] [1-2] [1-2] [1-2] [2-3] [1-2] [2-3]
Pentium II 400MHz 4.0x 100MHz [1-2] [1-2] [1-2] [2-3] [2-3] [1-2] [2-3]
Pentium II 350MHz 3.5x 100MHz [1-2] [1-2] [1-2] [1-2] [1-2] [2-3] [2-3]
Celeron 500MHz 7.5x 66MHz [1-2] [1-2] [2-3] [1-2] [1-2] [2-3] [1-2]
Celeron 466MHz 7.0x 66MHz [1-2] [1-2] [2-3] [2-3] [1-2] [2-3] [1-2]
Celeron 433MHz 6.5x 66MHz [1-2] [1-2] [2-3] [1-2] [2-3] [2-3] [1-2]
Celeron 400MHz 6.0x 66MHz [1-2] [1-2] [2-3] [2-3] [2-3] [2-3] [1-2]
Celeron 366MHz 5.5x 66MHz [1-2] [1-2] [2-3] [1-2] [1-2] [1-2] [2-3]
Pentium II/Celeron 333MHz 5.0x 66MHz [1-2] [1-2] [2-3] [2-3] [1-2] [1-2] [2-3]
Pentium II/Celeron 300MHz 4.5x 66MHz [1-2] [1-2] [2-3] [1-2] [2-3] [1-2] [2-3]
Pentium II/Celeron 266MHz 4.0x 66MHz [1-2] [1-2] [2-3] [2-3] [2-3] [1-2] [2-3]
Pentium II 233MHz 3.5x 66MHz [1-2] [1-2] [2-3] [2-3] [2-3] [1-2] [2-3]
For updated processor settings, please visit ASUS’ web site (see ASUS CONTACT INFORMATION).
NOTE: Overclocking your processor is not recommended. It may result in a slower
speed. Voltage Regulator Output Selection (VID) is not needed for the Pentium III /
II / Celeron processor because it sends VID signals directly to the onboard power
controller.
WARNING! PCI frequencies above 33MHz exceed the specifications for PCI
cards and are not guaranteed to be stable.