Filter
Top Products
5-225-22
5-225-22
5-22
Chapter 5: Software supportChapter 5: Software support
Chapter 5: Software supportChapter 5: Software support
Chapter 5: Software support
PHYSICAL DRIVE
0 XXXXXXXXXXX XXXXXXMB
1 XXXXXXXXXXX XXXXXXMB
2 XXXXXXXXXXX XXXXXXMB
3 XXXXXXXXXXX XXXXXXMB
b. Using the up or down arrow keys, select the
source drive
and press
<Enter>.
c. Repeat step b to select the
target drive
.
d. After selecting the source and target drives, the following pop-up
menu appears.
MAIN MENU
Auto configuration
Manual configuration
Create with data copy
Create without data copy
Manual configurationManual configuration
Manual configurationManual configuration
Manual configuration
a. Select
Manual configurationManual configuration
Manual configurationManual configuration
Manual configuration and press <Enter>. The selection
bar moves to the Physical Drives menu.
• The
Create with data copyCreate with data copy
Create with data copyCreate with data copy
Create with data copy option allows you to copy the
current data from the source drive to the mirror drive. The
CreateCreate
CreateCreate
Create
without data copy without data copy
without data copy without data copy
without data copy option disables the disk copy function of the
Mirrored set.
• If you selected
Create without data copyCreate without data copy
Create without data copyCreate without data copy
Create without data copy , the RAID 1 set
must be repartitioned and reformatted to guarantee the consistency
of its contents.
• Select
Create with data copy Create with data copy
Create with data copy Create with data copy
Create with data copy if you have important data in
your source drive.