Filter
Top Products
ASUS RS700-E7/RS4 6-23
6.2.8 Enabling WriteCache
You may manually enable the RAID controller’s WriteCache option after creating a
RAID set to improve the data transmission performance.
When you enable WriteCache, you may lose data when a power interruption occurs
while transmitting or exchanging data among the drives.
The WriteCache function is recommended for RAID 1 and RAID 10 sets.
To enable WriteCache
1. From the
Management Menu
, select
Objects
>
Adapter
, select an existing
adapter, and then press <Enter> to display the adapter properties.
2. Select
Disk WC
, and then press <Enter> to turn on the option.
5. When nished, press any key to continue.
Configure
Initialize
Objects
Rebuild
C h e c k
Disk Write Cache - Off(Write Through) or On(Write
Adapter
Virtual Drive
Physical Drive
Rebuild Rate = 30
Chk Const Rate = 30
FGI Rate = 30
BGI Rate = 30
Disk WC = Off
Read Ahead = On
Bios State = Enable
Cont On Error = Yes
Fast Init = Enable
Auto Rebuild = On
Auto Resume = Enable
Disk Coercion = 1GB
Factory Default
LSI Software RAID Conguration Utility Ver C.05 Sep 17, 2010
BIOS Version A.10.09231523R
Use Cursor Keys To Navigate Between Items And Press Enter To Select An Option
3. From the
Management Menu
, select
Objects
>
Virtual Drive
, select an
existing adapter and press <Enter>. Select
View/Update Parameters
and
press <Enter> to display the adapter properties.
4. Select
Disk WC
, and then press <Enter> to turn on the option.
Configure
Initialize
Objects
Rebuild
C h e c k
Disk Write Cache Setting of
Adapter
Virtual Drive
Physical Drive
Virtual
RAID = 0
Siz e =
148.580GB
Stripe Size = 64KB
#Stripes = 2
St ate =
OPTIMAL
Spans = 1
LSI Software RAID Conguration Utility Ver C.05 Sep 17, 2010
BIOS Version A.10.09231523R
Use Cursor Keys To Navigate Between Items And Press Enter To Select An Option