Filter
Top Products
7-8 Chapter 7: Driver installation
5. When asked if you will load additional RAID controller drivers, select No, then
press <Enter>.
More Driver Disks?
Do you wish to load any
more driver disks?
6. Follow the onscreen instructions to nish the OS installation.
7. When the installation is completed, DO NOT click
Reboot
. Press <Ctrl>
+ <Alt> + <F2> to switch to the command-line interface from graphic user
interface.
8. Type the following commands when using a Legacy oppy.
mkdir /mnt/driver
mount /dev/fd0 /mnt/driver
cd /mnt/driver
sh replace_ahci.sh
reboot