Filter
Top Products
2-23ASUS RS700-E7/RS4
2.8.4 Connecting the Intel
®
ASRK Module (Optional)
Follow the steps below to connect the ASRK Module to the connector on your
motherboard.
1. Locate the ASRK connector on the
motherboard.
2. Connect the ASRK module to the
connector.
Changing the module for different RAID settings:
1. Power off the system and disengage the original module.
2. Reboot the system to enter OS.
3. After the system successfully enters the OS, power off again.
4. Put the intended module in place and reboot the system.
5. The system will automatically detect the different RAID settings.
• For detail of Intel
®
Rapid Storage Technology utility, please refer to
Chapter
6RAIDConguration.
• The upgrade ASRK kit support HDD 1 - HDD 4 (ISAS1) only.
ASRK#1 SAS 3G RAID kit (RAID 0/1/10)
ASRK#2 SAS 3G RAID kit (RAID 0/1/10/5)