Filter
Top Products
Skip Mode This feature allows you to switch between computers in order to monitor
them manually. You can dwell on a particular port for as long or as little
as you like - as opposed to Auto Scanning, which automatically switches
after a fixed interval. To invoke Skip Mode, key in the following Hotkey
combination:
1. Invoke Hotkey Mode (see p. 3-1).
2. Key in [Arrow]
M
Where [Arrow] refers to one of the Arrow keys. After you
press [Arrow], you automatically exit Hotkey Mode, and enter
Skip Mode where you can switch ports as follows:
←
Skips from the current port to the first accessible port
previous to it. (See Scan/Skip Mode, p. 4-7, for
information regarding accessible ports.)
→
Skips from the current port to the next accessible port.
↑
Skips from the current port to the last accessible port
of the previous Station.
↓
Skips from the current port to the first accessible port
of the next Station.
M
Once you are in Skip Mode, you can keep on skipping by
pressing the Arrow keys. You don’t have to use the
[NumLock] + [-] combination again.
M
While Skip Mode is in effect, ordinary keyboard and mouse
functions are suspended - only Skip Mode compliant
keystrokes can be input. You must exit Skip Mode in order to
regain normal control of the console.
3. To exit Skip Mode, press [Esc] or [Spacebar].
2003-01-27
Hotkey Operation
3-5