Filter
Top Products
F4 ADM:
F4 is an Administrator only function. It allows the Administrator
to configure and control the overall operation of the OSD. To
change a setting Double Click it; or use the Up and Down Arrow
Keys to move the highlight bar to it then press [Enter].
After you select an item, a submenu with further choices appears.
Double Click the choice you want, or move the Highlight Bar to it
then press [Enter]. An icon appears before the selected choice so
that you know which one it is. The settings are explained in the
following table:
Setting Function
SET
USERNAME
AND
PASSWORD
This function is used to set Usernames and Passwords for the
Administrator and Users:
1. One Administrator and four User passwords can be set.
2. After you select the Administrator field or one of the User fields,
a screen that allows you to key in your username and
password appears. The username and password may be up
to 15 characters long, and can consist of any combination of
letters and numbers (A - Z, 0 - 9).
3. For each individual, key in the Username and Password, then
press [Enter].
4. To modify or delete a previous Username and/or Password,
use the backspace key to erase individual letters or numbers.
SET LOGOUT
TIMEOUT
If there is no input from the console for the amount of time set
with this function, the Operator is automatically logged out. A
login is necessary before the console can be used again.
This enables other Operators to gain access to the computers
when the original Operator is no longer accessing them, but
has forgotten to log out. To set the timeout value, key in a
number from 1 - 180 minutes, then press [Enter]. If the
number is 0 [zero], this function is disabled. Default is 0
(disbabled).
(Table continues on next page)
2003-01-27
ACS-1208AL / ACS-1216AL User Manual
4-8