Filter
Top Products
(F4 ADM: continued)
Setting Function
RESET
STATION IDS
If you change the position of one of the Stations in the daisy
chain, the OSD settings will no longer correspond to the new
situation. This function directs the OSD to rescan the Station
positions of the entire installation and updates the OSD so
that the OSD Station information corresponds to the new
physical layout.
Note: Only the Station Numbers get updated. Except for the
Port Names, all Administrator settings (such as Set Accessible
Ports, Set Quick View Ports, etc.), for all of the computers
affected by the change, have to be manually redone.
FIRMWARE
UPGRADE
In order to upgrade the ACS-1208AL / ACS-1216AL’s
firmware (see Chapter 5), you must first invoke Firmware
Upgrade Mode with this setting.
2003-01-27
OSD Operation
4-11