Filter
Top Products
KM0032 / KM0532 / KM0932 User Manual
4
Broadcast support enables executing the same command on multiple
servers at the same time
Multilingual user interface support
Enhanced video quality via automatic skew compensation support for the
KA7240 adapter cable, and the newer adapter cable series (KA7120,
KA7170, KA7130 KA7176)
Station Numbers (SN), Port Numbers (PN), serial devices, and power
devices are all integrated for management and control in a single GUI
Supports cascading KH1506 / KH1516 switches for low-cost expansion
Requirements
Consoles
The following hardware components are required for each KVM console:
A VGA, SVGA, or multisync monitor capable of displaying the highest
resolution provided by any computer on the installation
Keyboard and mouse (PS/2 or USB)
Console modules are required to connect KVM consoles to the KM0532 /
KM0932. They provide flexibility for your installation by allowing PS/2 and
USB interfaces to be mixed and matched at the KVM console side. The console
modules currently available are listed in the table below. Contact your dealer
for details or refer to the documentation included with your console module.
Computers
The following hardware components are required for each computer that
connects to the switch:
A VGA, SVGA, or multisync video graphics card with an HDB-15 port;
or, for legacy Sun systems, a Sun 13W3 video port
PS/2 mouse and keyboard ports (6-pin Mini-DIN), or at least one USB
port; or, for legacy Sun systems, a Sun style keyboard port (8-pin
Mini-DIN)
Function Model Number
PS/2-USB Combo Graphic Console Module with
dual RJ-45 and RS232
KA7230
PS/2-USB Combo Graphic Console Module with
dual RJ-45, RS232, virtual media and audio
KA7240