![](http://pdfasset.owneriq.net/3/d8/3d8ba919-6680-4981-96f3-a43d770da4c7/3d8ba919-6680-4981-96f3-a43d770da4c7-bg1b.png)
Chapter 2. Hardware Setup
15
Rack Mounting - Rear
To mount the unit at the rear of the rack, do the following:
1. Remove the two screws at the rear of the unit:
2. Use the M3 x 8 Phillips head hex screws supplied with the rack mounting
kit to screw the rack mounting brackets into the rear of the unit:
Phillips head hex
M3 x 6
Phillips head hex
M3 x 8