Filter
Top Products
Connecting and Configuring your Router
18
2.4 This step instructs you to look at the
lights on the front of your Router. Make
sure the appropriate lights are ON. Refer
to the Easy Install Wizard software on
your computer’s screen for more details.
Click “Next” to continue.
Note: The Easy Install Wizard may ask
you to reboot your computer. If it does,
reboot your computer and proceed with
the installation.
Step 3 Check the Connection
3.1
Once you have completed connecting
the Router, the Wizard will check the
connection to the Router and then go
on to determine what type of Internet
connection you have.
3.2 User Name and Password Needed
If you have a connection type that
requires a user name and a password, the
Wizard will ask you to type in your user
name and password. If your connection
type does not require a user name and
password, you will not see this screen.
Your user name and password is provided
to you by your Internet Service Provider.
If you have to type in a user name and
password to connect to the Internet,
then type that same user name and
password in here. Your user name looks
something like “jsmith@myisp.com” or
simply “jsmith”. The service name is
optional and is very rarely required by
your ISP. If you don’t know your service
name, leave this blank. When you have
entered your information, click “Next”
to move on.