Filter
Top Products
23
2
1
3
4
5
6
7
8
9
10
section
Alternate Setup Method
1.5 Turn your cable or DSL modem on by reconnecting the power supply
to the modem.
Mac or PC computer that was originally connected
to the cable or DSL modem
Network cable
(to computer)
To power adapter
Existing networking cable
(came with modem)
Note: Your Router may have ports in different locations than depicted
in the illustration above.
1.6 Before plugging the power cord into the Router, plug the cord into the
wall, then plug the cord into the Router’s power jack.
1.7 Verify that your modem is connected to the Router by checking the
lights on the front of the Router. The BLUE light labeled “Modem”
should be ON if your modem is connected correctly to the Router. If it
is not, recheck your connections.
1.8 Verify that your computer is connected properly to the Router by
checking the lights labeled “1–4”. The light that corresponds to the
numbered port connected to your computer should be ON if your
computer is connected properly. If it is not, recheck your connections.