Filter
Top Products
Connecting and Configuring your Router
20
5.1 Checking Internet
The Wizard will now check for an Internet
connection. This can take a few minutes.
The Wizard may not detect a connection
right away. If not, it will retry a number
of times. The “Connected” light on the
front panel of the Router will flash
during this time. Please be patient
through this process.
5.2 Finished
When the Internet connection is
complete, the Wizard will tell you that
you are finished. The “Connected” LED
on the front of the Router will be solid
BLUE, indicating that the Router is now
connected to the Internet.
Your Router is now connected to the Internet.
Now you can begin surfing the Internet by
opening your browser and going to your
favorite web page.
Step 5
Configure the Router
The Wizard will now transfer all of the configuration information to the Router.
This will take approximately one minute. During this time, do not turn off the
Router or computer. The Router will restart itself at the end of this step.