Filter
Top Products
53
2
1
3
4
5
6
7
8
9
10
section
Using the Web-Based Advanced User Interface
Setting WPA/WPA2
1. Select “WPA/WPA2” or “WPA2 only” from the “Allowed Client Type”.
2. Select “Pre-shared key” as the authentication type.
3. Enter your pre-shared key. This can be from eight to 63 characters and
can be letters, numbers, or symbols. This same key must be used on all
of the clients that you set up. This pre-shared key will allow users full
access to your network including shared files and printers.
4. Click “Apply Changes” to finish. You must now set all clients to match
these settings.
5. Enter your pre-shared key for guest access. This can be from eight to
63 characters and can be letters, numbers, or symbols. This guest pre-
shared key allows users only Internet access.
6. Click “Apply Changes” to finish. You must now set all clients to match
these settings depending on the type of access you want them to have.