Filter
Top Products
Alternate Setup Method
22
The Web-Based Advanced User Interface is a web-based tool that you can use
to set up the Router if you don’t want to use the Easy Install Wizard. You can
also use it to manage advanced functions of the Router. From the Web-Based
Advanced User Interface, you can perform the following tasks:
• View the Router’s current settings and status
• Configure the Router to connect to your ISP with the settings that they
provided you
• Change the current network settings such as the Internal IP address, the
IP address pool, DHCP settings, and more
• Set the Router’s firewall to work with specific applications
(port forwarding)
• Set up security features such as client restrictions, MAC address filtering,
WEP, and WPA
• Enable the DMZ feature for a single computer on your network
• Change the Router’s internal password
• Enable/Disable UPnP (Universal Plug-and-Play)
• Reset the Router
• Back up your configuration settings
• Reset the Router’s default settings
• Update the Router’s firmware
Step 1
Connect your Router
1.1 Turn off the power to your modem by unplugging the power supply from
the modem.
1.2 Locate the network cable that is connected between your modem and
your computer and unplug it from your computer, leaving the other end
connected to your modem.
1.3 Plug the loose end of the cable you just unplugged into the port on the
back of the Router labeled “Modem”.
1.4 Connect a new network cable (not included) from the back of the
computer to one of the wired computer ports labeled “1–4”. Note: It
does not matter which numbered port you choose.