Filter
Top Products
ExpertNet Lite Assessment Tool - User Guide
24
Begin Data Collection
At this point the Network Paths View should be populated with tests that provide a
good coverage of your network, and all of these tests should be verified.
Every ping test will collect raw Round Trip Time (RTT) data for all ingress interfaces on
the path. Every RTP test will cause a flow of RTP packets through the network and
collect QoS data. In addition, each SNMP-contactable router will be polled to collect
CPU and interface utilization.
To start collecting RTP, Ping and SNMP measurements, select Start Measurements
item from the Measurements menu or click the toolbar icon .
Data is collected for the Data Collection Interval time set in the General Settings
page of the Configuration Wizard or until stopped.
Leave ELAT running until the test period is over. A progress bar displays at the bottom
of the window.