Avaya ELAT Switch User Manual


 
ExpertNet Lite Assessment Tool - User Guide
1
About this guide
This guide is intended for BusinessPartners and Avaya Associates using the
ExpertNet Lite Assessment Tool (ELAT) for the first time. It describes how to get
started and how to use ELAT for customers purchasing an IP Telephony solution that
requires an IP Network Readiness Assessment.
About the ExpertNet™ Lite Assessment Tool
ELAT is a software application designed to gather information from an IP network. The
data gathered is used to produce a Network Readiness Assessment report. It is
designed to run for an extended period of time (usually 5 days), in order to see trends
in network performance. The data is summarized graphically and can be included in
the report.
Three types of queries are used to perform the measurements: RTP tests, ping probes
and SNMP GET requests.
ELAT provides RTP test functionality through the use of Traffic Simulators, which
are installed on remote machines on the customer network.
ELAT supports two ping protocols: UDP (default) and ICMP. On some networks,
the default UDP protocol may not work. (For example, a firewall may be
configured to block traffic to certain ports.) In such cases, the user can switch
the protocol to ICMP.
ELAT Controller supports SNMPv1 and SNMPv2 protocols. It collects processor
and layer-3 interface utilization variables from devices on network paths. For the
Controller to be able to retrieve SNMP data, it must be configured with a list of
SNMP community strings.
The ELAT Controller collects Round Trip Time and One Way Delay measurements along
network paths. Network paths can be entered manually by the user, or discovered
automatically. To discover paths automatically, the Controller employs, transparently
to the user, a bundled ExpertNet Discovery Tool. The EDT tool discovers network
topology in a scope configured by the user.