Filter
Top Products
Hardware Upgrade and Maintenance
16 Secure Services Gateway (SSG) Maintenance Guide
Removing the hard drive from the x305 IBM server
To remove the hard drive from the server:
1. Locate the drive cage in the left-hand corner of the front of the server. See Figure 2
.
Figure 2: Removing and replacing the drive cage
2. Use the black pull handles on the ribbon cables to unplug the data connectors from the back
of the CD-ROM drive and hard drive.
3. Push the ribbon cable back out of the way.
Figure notes:
1.
Drive bay housing drive cage
5.
Tab s
2.
Ribbon cable attached to hard
drive
6.
Screws holding hard drive in drive
cage
3.
Cable connected to the CD-ROM
drive
7.
Hard drive
4.
Captive screw holding drive cage
8.
Drive cage
h3msdrv3 KLC 020204
1
2
3
5
6
6
d
i
s
c
8
7
4
6