Filter
Top Products
Using the Avaya Remote Supervisor Adapter
Alerts
46 Avaya Remote Supervisor Adapter User Guide
November 2003
4 Host Name or IP Address [no default]: In the field that corresponds with the Community Name,
type the IP Address or Host Name for each community manager.
5 If a DNS server is not used or available, scroll down and click Save. If a DNS server will be used,
continue to Enabling DNS
on page 46 before restarting the ASM.
NOTE:
You must restart the ASM to activate the Network Protocols changes.
6 To restart the ASM, click Restart ASM under the ASM Control heading in the navagation pane.
Enabling DNS
To enable the Domain Name System (DNS) and specify the DNS IP address:
1 In the navigation pane, select Network Protocols under the ASM Control heading.
The Simple Network Management Protocol (SNMP) window appears.
2 Scroll down to the DNS section (see Figure 18, Advanced Ethernet setup, on page 43).
Figure 21: DNS
3 In the DNS field [default: Disabled]: Select Enabled from the drop-down menu if a DNS server
will be used.
4 In the DNS server IP address 1, 2, and 3 fields [default: 0.0.0.0]: You can specify up to three
DNS server IP addresses once the DNS field is Enabled. Each IP address should contain integers
0 through 255, separated by periods.
5 Scroll to the bottom of the page and click Save.
NOTE:
You must restart the ASM to activate the Network Protocols changes.
6 To restart the ASM, select Restart ASM under the ASM Control heading in the navigation pane.